Config ID 2cb7a0f2d97a1eabdcfa60a28ee321a6859e8f541b5e4ca773b801a597cd2487
Getting Started
  1. Verify your Apprise API Status:

  2. The following is your Apprise Configuration ID: 

    2cb7a0f2d97a1eabdcfa60a28ee321a6859e8f541b5e4ca773b801a597cd2487
    For some examples on how to build a development environment around this: click here.

  3. In the future you can return to this configuration screen at any time by placing the following into your browser: 
    https://apprise.anonas.loiu92.com/cfg/2cb7a0f2d97a1eabdcfa60a28ee321a6859e8f541b5e4ca773b801a597cd2487
  4. Use the settings Configuration section to prepare and save your Apprise configuration.
    lightbulb_outlineYou can always refer to the build Apprise URL Builder if you're having troubles assembling your URL(s).
  5. Use the web Review section to review what was parsed/detected from your defined configuration.
  6. Use the announcement Notifications section to test out your saved configuration.
    lightbulb_outline: The number also provided in the announcement Notifications tab identifies how many notifications will be sent (based on tags/configuration provided) when using this section.
Working Remotely With Your Configuration
Using The Apprise CLI

The following command would cause apprise to directly notify all of your services: 

apprise --body="Test Message" \

                   apprises://apprise.anonas.loiu92.com/2cb7a0f2d97a1eabdcfa60a28ee321a6859e8f541b5e4ca773b801a597cd2487/?tags=all
Send one or more attachments like this: 
apprise --body="Test Message" \

                   apprises://apprise.anonas.loiu92.com/2cb7a0f2d97a1eabdcfa60a28ee321a6859e8f541b5e4ca773b801a597cd2487/?tags=all \

                   --attach=https://raw.githubusercontent.com/caronc/apprise/master/apprise/assets/themes/default/apprise-logo.png

                   --attach=/path/to/an/attachment.jpeg

The following command would cause apprise to retrieve the configuration loaded and send a test notification to all of your added services: 

apprise --body="Test Message" --tag=all \

                   --config=https://apprise.anonas.loiu92.com/cfg/2cb7a0f2d97a1eabdcfa60a28ee321a6859e8f541b5e4ca773b801a597cd2487
You may also create an Apprise configuration file that contains this line somewhere in it: 
include https://apprise.anonas.loiu92.com/cfg/2cb7a0f2d97a1eabdcfa60a28ee321a6859e8f541b5e4ca773b801a597cd2487
By leveraging the include directive, it will automatically be referenced for future calls to the apprise tool. All future calls using Apprise now simplify to: 
apprise --body="Test Message" --tag=all
Using CURL

The following command would cause the Apprise API to notify all of your services: 

curl -X POST \

                       -F "body=Test Message" \

                       -F "tags=all" \

                       https://apprise.anonas.loiu92.com/notify/2cb7a0f2d97a1eabdcfa60a28ee321a6859e8f541b5e4ca773b801a597cd2487
When sending attachments, curl requires all local files be prefixed with @. You can an add attachment like this: 
curl -X POST \

                  -F "tags=all" \

                  -F "body=Test Message" \

                  -F [email protected] \

                  https://apprise.anonas.loiu92.com/notify/2cb7a0f2d97a1eabdcfa60a28ee321a6859e8f541b5e4ca773b801a597cd2487
When sending more than one attachment, you must uniquely assign each attachment to a new ID. The example below leverages attach1 and attach2: 
curl -X POST \

                  -F "tags=all" \

                  -F "body=Test Message" \

                  -F [email protected] \

                  -F attach2=@/my/path/to/Apprise.doc \

                  https://apprise.anonas.loiu92.com/notify/2cb7a0f2d97a1eabdcfa60a28ee321a6859e8f541b5e4ca773b801a597cd2487
Sends a notification to our endpoints with an attachment and no body specified: 
curl -X POST \

                   -F "tag=all" \ 

                   -F "attach=https://raw.githubusercontent.com/caronc/apprise/master/apprise/assets/themes/default/apprise-logo.png" \ 

                   https://apprise.anonas.loiu92.com/notify/2cb7a0f2d97a1eabdcfa60a28ee321a6859e8f541b5e4ca773b801a597cd2487
Configuration

Define your configuration below:

Apprise URL Builder build

Once you have successfully loaded at least one Apprise URL on the settings Configuration section, your loaded entries will display here.

Loaded Configuration

0 notification(s) selected for sending

  • Review the parsed destinations below before sending.
  • Select a tag (🏷️) on any entry to include it in announcement Notifications.
  • Use send to run a quick test and inspect the full debug output for that entry.
  • Need more destinations? Add or update them in settings Configuration.
Notifications
You can send a notification using the loaded configuration:
No Notification Targets Selected
Choose one or more tags from the Tags dropdown, select target entries from the web Review section, or add more entries in the settings Configuration section.
Clear Form restore_page